solutions
AEMS implements the latest technology in our natural gas processing solution and gas Treating plants
01. Natural Gas Liquid (NGL) Fractionation
NGL must be separated into marketable products. AEMS engineers use the most advanced and economical designs for the required fractionation columns. Fluctuations in feedstock quantity and quality are taken into consideration to allow for a wide range of operating parameters. Heat pumped splitters and other innovative solutions are often provided depending on the application.
02. Refrigerated (JT) Plants
JT plants are economically designed for gas liquids recovery. These are simple systems to cool the gas to meet a dewpoint specification. JT plants are an economical choice for rich gas applications as, frequently, no residue compression is required. These may be used as a quick solution to gas liquids recovery while a larger plant is being constructed. AEMS employs the use of different technologies to ensure the appropriate level of hydrocarbon dewpoint controlling, such as a JT plant or a MRU plant. Hydrocarbon dewpoint control is critical for transmission pipelines.
03. Inlet Liquid Handling and Condensate Stabilization
04. Amine Treating for Acid Gas Removal
05. Sulfur Recovery and Handling
06. Gas Dehydration
07. Condensate Stabilization
Condensate stabilizers are designed to reduce the vapor pressure of raw liquid condensate from a wellhead or pipeline to “stabilize” the liquid product for storage and sales. Stabilization is typically accomplished by liberating light hydrocarbons (C1 through C4s) in a medium- to low-pressure, reboiled distillation column. The overhead vapor can be utilized as fuel or returned to a plant for further processing. The remaining liquid product (C5+) can be stored or transported as a natural gasoline product or blended with a crude feedstock for further process. Some designs also allow for recovery of a separate Y-Grade NGL product. AEMS can provide single Tower or twin tower stabilizers to meet your requirements.
AEMS Provides
- Standard or customized designs for 2,000, 5,000, and 10,000, 15,000, 20,000 and 30,000 bbl/day and can custom designs up to 40,000 bbl/day or higher depending on the customers requirements
- Standard packages designed for up to 1100 psig feed pressure
- Systems can produce liquid RVP products from 8-12 psia
- All packages are completely modularized (Plug & Play) on 1-2 skids, shipped fully assembled with all piping, valves, instrumentation, wiring, and insulation.
- Optional add-on reflux package will allow for separate Y-Grade NGL recovery
08. Slug Catchers and Inlet Liquid Handling
Slug catchers are devices designed to take up variable volumes of liquid that form in pipelines due to liquid holdup from velocity changes or pigging activities. While typically provided at the inlet of our gas processing plants, such liquid handling has become a significant area of technology specialization, often on a standalone basis. Azota designs and installs slug catchers and other liquid handling devices to exacting specifications to meet your liquid removal needs.
09. Horizontal Vessel Slug Catchers
- Vessel type slug catchers are typically implemented when expected slug volumes are relatively small or inlet pressures are low
- AEMS can design standard or customized designs for 250, up to 1000 barrel capacity vessels depending on your requirement
- All vessel-type slug catchers are designed to AMSE Section VIII Div 1
- Optional drain boots can be added for bulk water removal
- Micron level removal is possible with the addition of internal vane packs or filter elements
10. Harp-Type Slug Catchers
- Harp (or finger) type slug catchers are made of multiple straight runs of pipe (“fingers”) and are usually utilized for high pressure systems or large slug volumes
- Can be designed to ASME B31.3 or B31.8 Piping codes
11. Inlet Liquids Handling
AEMS has the capabilities to design and install various types of inlet liquids handling equipment, including
- Wellhead Separators
- Test Separators
- Heater Treaters
- Filter Separators
- Filter Coalescers
- Three Phase Separators
- And More…
12. Pipeline Compressor Stations
AEMS and it partners both suppliers and contractors are well suited to design and build compressor stations to meet your needs. We work closely with all major compressor and turbine manufacturers to ensure the most appropriate equipment is specified and is consistent with your existing operations. More importantly, we are well able to meet tight deadlines for any time sensitive projects.
13. Mini LNG & Pre-treament Facilities
14. Power Plant Gas Pretreatment System
15. Cryogenic Plants
16. Plant upgrades & Modernization
For general information and inquiries,
contact the main office number:
